Products    >    Oscilloscopes  >    200MHz Digital Oscilloscope  >    DSO4202C
  • Build in Arbitrary Waveform Generator 200MHz Digital Oscilloscope

    Model: DSO4202C

    Features:   

    ●2 Channel Digital Oscilloscope + 1 Channel Arbitrary/Function Waveform Generator + Synchronizing Signal + External Trigger
    ●The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously
    ●Oscilloscope: 1GSa/s Sample Rate, 200MHz Bandwidth, more than 20 kinds of auto measurement functions
    ●Powerful Trigger Function: Edge, Video, Pulse, Slope, Over time, Alternative;
    ●Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution
    ●Support SD card, VGA function (optional);
    ●Integrated USB Host, Support USB disk storage, USB interface/SD card system update

  • Products You May Like
    • Overview
    • Specification
    • Send your inquiry
    • DSO4000C.jpg

    • ModelDSO4202CDSO4102CDSO4072C
      Oscilloscope
      Bandwidth200MHz100MHz70MHz
      Rise Time at BNC( typical)1.8ns 3.5ns5ns
      Sample RateSampling Rate Range: 1GSa/s; Equivalent Sample Rate: 25GSa/s
      Inputs CouplingAC, DC, GND
      Inpits Impendance1MΩ±2% ‖20pF±3pF
      Probe Attenuation1X, 10X
      Supported Probe Attenuation Factor1X, 10X, 100X, 1000X
      Maximum Input VoltageCAT I  and CAT II: 300VRMS (10×) ; CAT III: 150VRMS(1×);
      Waveform Interpolation(sin x)/x
      Record Length40kpts
      SEC/DIV Range2ns/div to 40s/div
      Sample Rate and Delay Time Accuracy±50ppm(at over any ≥1ms time interval)
      Vertical Resolution8-bit resolution, all channel sampled simultaneously
      Position Range2mV/div to 10V/div
      Offset Range2mV/div to 20mV/div, ±400mV;  50mV/div to 200mV/div, ±1V
      500mV/div to 2V/div, ±40V; 5V/div to 10V/div, ±50V
      Math+, -,   *, /, FFT
      Bandwidth Limit20MHz
      Low Frequency Response (-3db)≤10Hz at BNC
      DC Gain Accuracy±3%   for Normal or Average acquisition mode, 10V/div to 10mV/div;
      ±4% for Normal or Average acquisition mode, 5mV/div to   2mV/div
      DC Measurement Accuracy,When   vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV)   only 10mV/div or greater is selected;
      Average Acquisition ModeWhen vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from  2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 10V/div
      Volts Measurement Repeatability, Average Acquisition Mode

      Delta volts between any two averages of ≥16 waveforms acquired

      under same setup and ambient conditions

      Trigger TypesEdge, Video, Pulse, Slope, Over time, Alternative
      Trigger SourceCH1, CH2, EXT, EXT/5, AC Line
      Trigger ModesAuto, Normal, Single
      Coupling TypeDC, AC, Noise Reject, HF Reject, LF Reject
      Trigger Level RangeCH1/CH2:  ±8 divisions from center of screen; EXT: ±1.2V; EXT/5:±6V
      Holdoff Range100ns ~ 10s
      Pulse Width Range20ns ~ 10s
      Time Range20ns ~ 10s
      Over Time ModeRising edge or Falling edge
      Trigger on CH1Internal Trigger: Edge, Pulse Width, Video, Slope
      Trigger on CH2Internal Trigger: Edge, Pulse Width, Video, Slope
      Trigger Frequency Counter6 digits
      Frequency RangeAC coupled, from 4Hz minimum to rated bandwidth
      Cursor MeasurementVoltage difference between cursors: delt V
      Time difference between cursors: delt T
      Reciprocal of delt T in Hertz (1/delt T)
      Auto MeasuermentFrequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time,  +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall,   +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean,   Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
      Signal Source Mode
      Waveform ImpedanceDC-25MHz
      Sample Rate200MHz DDS
      Output WaveformArbitrary /square /sine /triangle /trapezoidal /pulse /DC
      Frequency Resolution0.10%
      Waveform Depth2KSa
      Vertical Resolution12bit
      Frequency Stability<30ppm
      Waveform Range-3.5V~+3.5V
      Output Impedance50Ω
      Output Current50mA Ipeak=50mA
      System BW25M
      Harmonic Distortion-50dBc(1KHz),-40dBc(10KHz)
      General Specification
      Display7 inch 64K color TFT 800*480 pixels
      Power Supply100-120VACRMS(±10%),   45Hz to 440Hz, CATⅡ
      120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
      Power Consumption<30W
      Fuse2A, Trating, 250V
      Dimension385mm(L)*200mm(W)* 245mm(H)
      Weight3.5kg(with Packing);  2.08kg(without Packing)
    • *From:
      Enter your email
      *Message:
      Enter your Message
Corpyright © 2011 Wellzion Electronic Technology CO.,Ltd All Rights Reserved     备案许可证号:闽ICP备12000597号
Contact us
----Tel:+86-592-5562446----
Follow Us On