Today’s wireless spectrum is shared among different communications systems and services including mobile communications, mobile radios,paging, wireless local-area networks and digital video broadcasting.In additional to licensed systems, the spectrum is also shared with unlicensed transmitters and signal impairments such as reflections and fading.The combination of all these signals creates a very complex environment which must be first cleared and routinely monitored in order to maximize service performance.
Designed specifically for wireless communications field engineers and technicians, the E8600B Spectrum Analyzer provides all necessary measurement functions and performance to accurately characterize the signal environment in addition to clearing, detecting,identifying and locating signal interference in a lightweight,handheld instrument.
Measurements:
Spectrum Analysis
Channel Power
Occupied Bandwidth (OBW)
Adjacent Channel Leakage Ratio (ACLR)
Field Strength
FM/AM
Optional Measurement Modes:
Interference Analyzer (DML-110)
Coverage Mapping (DML-120 )
High Precision Power Meter (DML-015)
Tracking Generator (DML-035)
GPS (DML-999)
LTE FDD Analyzer (DML-803)
LTE FDD Air Interface Test (DML-804)
LTE TDD Analyzer (DML-805)
LTE TDD Air Interface Test (DML-806)
Frequency | |
Frequency Range | 9kHz~6.0GHz |
Resolution | 1Hz |
Aging | <± 1.0ppm/yr |
Frequency Span | 1kHz to 6GHz in 1-2-5 sequence (automode),and 0 Hz (zero span) |
Bandwidth | |
Resolution Bandwidth (RBW) | 1Hz to 3MHz in 1-3 sequence (auto or manually selectable) |
Video Bandwidth (VBW) | 1Hz to 3MHz in 1-3 sequence (auto or manually selectable) |
Spectral Purity (Phase Noise) | |
@ 1kHz Offset from carrier | -90 dBc/Hz |
@ 10kHz Offset from carrier | -100 dBc/Hz |
@ 100kHz Offset from carrier | -105 dBc/Hz |
Amplitude | |
Dynamic Range | >100dB |
Measurement Range | DANL to maximum safe input level |
Maximum Safe Input | +30dBm (peak power, input attenuation > 15dB), 50VDC |
Amplitude Accuracy | ≤ ± 1.0dB |
Attenuator Range | 0dB to 55 dB in 1dB steps |
Displayed Average Noise Level (DANL) | |
(Input terminated, RBW = 1 Hz, Attn = 0 dBm, Avg Detector) | |
Preamp Off | ≤ -144 dBm, typical (1MHz~1GHz) |
≤ -138 dBm, typical (1GHz~6GHz) | |
Preamp On | ≤ -158 dBm, typical (1MHz~1GHz) |
≤ -154 dBm, typical (1GHz~6GHz) | |
Connectors | |
RF In | Type N, female, 50Ω |
RF In Damage | +30dBm, ± 50 VDC |
Connectivity | |
USB host | Type A, 1-Port (connect flash drive for data transfer) |
USB client | 5-pin mini-B (connect to PC for data transfer) |
LAN | 10M/100M LAN |
Data Storage | |
Internal | 1GB, > 2000 saved measurement files |
External | Limited by size of USB flash drive |
Battery | |
Battery Type | Li-Ion, 11.1V, 5.2AH |
Operation | > 4 hours, continuous; 8 hrs, idle |
General Spec. | |
Display | 8.4 inch TFT LCD(800 x 600) |
European EMC | IEC/EN 61326-1:2006 |
AC Adapter Output | 19V / 3.42Ah |
AC Adapter Input | 100~240 VAC, 50-60 Hz |
Dimension | 278mm*217mm*87mm |
Weight | 3kg |
*From: |
Enter your email |
*Message: |
Enter your Message |