Add to Favorites |
Worldwide
中文 |
Polski | English
 |
300MHz 3.2GSa/s Digital Oscilloscope
Features:●300MHz Bandwidth, 3.2GSa/s Real-time Sample Rate ●High-resolution TFT color display,800x600 pixels,65535 colors ●Saving of measured values and graphics directly onto the USB-stick ●VGA-output port for external monitor(Optional) ●Autoset and autoscale function for easy operation ●LAN connection for remote acces via network ●Internal memory of 10 million points per channel or 15 waveforms ●20 automatic measurement modes and FFT function ●PASS/FAIL function ●Safety: CAT II  |
Hot Model
Model | |||||
Channels | 2 | 2 | 2 | 2 | 2 |
Bandwidth | 200MHz | 200MHz | 200MHz | 300MHz | 300MHz |
Sample-rate | 1GSa/s | 1GSa/s | 2GSa/s | 2.5GSa/s | 3.2GSa/s |
Memory Length | 2Mpts | 18Kpts | 10Mpts | 10Mpts | 10Mpts |
Auto Measurment | 32 | 32 | 20 | 20 | 20 |
Vertical Sensitivity | 2mv-5v/div | 2mv-5v/div | 2mv-10v/div | 2mv-10v/div | 2mv-10v/div |
Horizontal Range | 2ns-40s/div | 2.5ns-50s/div | 1ns-100s/div | 1ns-100s/div | 1ns-100s/div |
Trigger types | Edge, Video, Pulse, Slope, Over time, Alternative | Edge, Pulse, Video, Slope, Alternative | Edge, Pulse, Video, Slope, Alternative | Edge, Pulse, Video, Slope, Alternative | Edge,Pulse, Video, Slope, Alternative |
Display | 7 inch | 7 inch | 8 inch | 8 inch | 8 inch |
PictBridge Print | - - - - | √ | - - - - | - - - - | - - - - |
USB Interface | √ | √ | √ | √ | √ |
VGA Interface | √(optional) | - - - - | √(optional) | √(optional) | √(optional) |
LAN Interface | - - - - | - - - - | √ | √ | √ |
SD Card | 2 GB | - - - - | - - - - | - - - - | - - - - |
Bandwidth | 300MHz | |
Sample rate(Real time) | 3.2GS/s | |
Horizontal Scale(S/div) | 1ns/div～100s/div, step by1~2~5 | |
Rise time (at input, typical) | ≤1.17ns | |
Channels | 2 + 1 (External) | |
Display | 8" color LCD, TFT display , 800×600 pixels, 65535 colors | |
Record length | Max. 10M | |
Input impedance | 1MΩ ± 2%, in parallel with 10pF ± 5pF | |
channels Isolation | 50Hz : 100 : 1 , 10MHz : 40 : 1 | |
Max.input voltage | 400V(PK-PK) (DC+AC PK-PK) | |
DC gain accuracy | ±3% | |
DC accuracy(Average) | Average≥16:±(3% reading+0.05div) for Δ V | |
Probe attenuation factor | 1X, 10X, 100X, 1000X | |
LF respond(AC,-3dB) | ≥10Hz(at input,AC coupling,-3dB) | |
Sample rate/relay time accuracy | ±100ppm | |
Interpolation | (sinx)/ x | |
Interval(△T) accuracy(full bandwidth) | Single: ±(1 interval time+100ppm×reading+0.6ns) | |
Input coupling | DC, AC , GND | |
Vertical resolution(A/D) | 8 bits resolution (2 Channels simultaneously) | |
Vertical sensitivity | 2mV/div~10V/div | |
Trigger type | Edge, Pulse, Video, Slope, Alternate | |
Trigger mode | Auto, Normal, Single | |
Trigger level | ±6 divisions from screen center | |
Line/field frequency(Video) | Support standard NTSC,PAL and SECAM broadcast systems | |
Cursor measurement | Δ V and Δ T between cursors | |
Automatic measurement | Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot,Pre-shoot,Rise time,Fall time,+Width,-Width,+Duty,-Duty,Delay A→B↑ ,Delay A→B↓ | |
Waveform Math | ＋, －, ×, ÷, FFT | |
Waveform storage | 15 waveforms | |
Lissajou’s figure | Bandwidth | Full bandwidth |
Phase difference | ±3 degrees | |
Communication interface | USB, USB flash disk storage, Pass / Fail, LAN, VGA (optional), or COM (optional) | |
Cymometer | Available | |
Power supply | 100V-240V AC,50/60Hz,CAT Ⅱ | |
Power consumption | <18W | |
Fuse | 2A,T class,250V | |
Battery(Optional) | 7.4V, 8000mA | |
Dimensions | 340mm(L)×155mm(H)×70mm(W) | |
Weight(without package) | 1.8kg | |
| *From: |
Enter your email |
| *Message: |
Enter your Message |
 |
