Model | HSA2030A | HSA2030B | |
Frequency Characteristic | |||
Frequency Range | 9KHz~3.2GHz AC Coupled | 9KHz~3.2GHz AC Coupled 5M~3.2GHz TG | |
Frequency Resolution | 1Hz | ||
Reference Frequency | 10MHz | ||
Frequency Readout Accuracy | ±(frequency indication*frequency reference uncertainty +1%*span +20%RBW +marker resolution +1Hz) | ||
Frequency aging rate | ±1ppm/year (0°C~50°C,Reference is 25°C) | ||
Temperature stability | ±1ppm/year | ||
Marker Resolution | (Frequency span)/(number of sweep points-1) | ||
Resolution Bandwidth(RBW) | |||
Filter Bandwidth(RBW) | 10Hz to 1MHz,1-3-10 sequence | ||
Accuracy | ±5% RBW=10Hz~1MHz nominal | ||
Resolution Filter Shape Factor | <5:1 nominal | ||
Video Bandwidth(VBW) | 1Hz to 1MHz,1-3-10 sequence(-3dB bandwidth) | ||
Video Bandwidth Accuracy | ±10% VBM=1Hz~1MHz nominal | ||
Displayed Average Noise Level (normalized to1Hz) | |||
Preamp off | 9K~1MHz | -108dBm,typical -127dBm | |
1MHz~10MHz | -128dBm,typical -146dBm | ||
10MHz ~500MHz | -142dBm,typical -146dBm | ||
500MHz~2.5GHz | -141dBm,typical -145dBm | ||
2.5GHz ~3.2GHz | -140dBm,typical -144dBm | ||
Preamp on | 9K~1MHz | -131dBm,typical -150dBm | |
1MHz~10MHz | -148dBm,typical -163dBm | ||
10MHz ~500MHz | -161dBm,typical -164dBm | ||
500MHz~2.5GHz | -159dBm,typical -162dBm | ||
2.5GHz~3.2GHz | -158dBm,typical -161dBm | ||
SSB Phase Noise (20°C~30°C, 500MHz Central Frequency) | |||
Carrier Offset | 10K | <-92 dBc/Hz, typical -95 dBc/Hz | |
30K | <-93 dBc/Hz, typical -96 dBc/Hz | ||
100K | <-95 dBc/Hz, typical -97 dBc/Hz | ||
1MHz | <-117 dBc/Hz, typical -119 dBc/Hz | ||
Sweep Time | |||
Sweep Range | Span>100Hz | 2ms to 1000s | |
Span=0Hz | 600ns to 200s | ||
Sweep Mode | Continuous, single | ||
Trigger Source | Free run; video; external | ||
Trigger Slope | Selectable positive or negative edge | ||
Trigger Delay | Span =0Hz | ±12ms to ±12s nominal | |
Frequency Counter | |||
Counter Resolution | 1Hz | ||
Accuracy | ± (marker frequency×frequency reference uncertainty+counter resolution) | ||
Level Display Range | |||
Log Scale and Units | 1 to 10 dB/divisions in 1, 2, 5, 10 dB steps, 10 divisions displayed | ||
Linear Scale and Units | 0 to 100%,10 divisions displayed | ||
Scale Unit | dBm,dBmV,dBuV,Watts,Volts | ||
Sweep (Trace) Points | 461 | ||
Number of Markers | 4 | ||
Detectors | Normal, positive peak, dample, negative peak, RMS | ||
Number of Traces | 4 | ||
Trace Functions | Clear/write, maximum hold, minimum hold, average, check,close | ||
Level Measurement Error | ±1.5dB(excluding input VSWR mismatch) | ||
Reference Level | |||
Second Harmonic Distortion(SHI) | <65dBc,50MHz~3GHz (Mixer level -30dBm,attenuator =0dB,preamp off,20°C~30°C) | ||
TOI | 50~300MHz | +8dBm,Third-order intermodulation products:2 x -20dBm; | |
300MHz~3.2GHz | +10dBm | ||
Input Related Spurious | <-75dBc,(input mixer = -30dBm) | ||
Inherent Residual Response | <-90dBm,typical -98dBm | ||
RF Input VSWR | 10MHz~3.2GHz | <1.5:1, nominal Attenuator setting 10~20dB | |
10MHz Reference/External Trigger Input | |||
Reference Iinput Frequency | 10MHz | ||
Reference Input Amplitude | 0~10dBm | ||
Trigger Voltage | 5V TTL level | ||
Connector and Output Impendence | N female;(50Ω) | ||
Gennral Characteristic | |||
Language | English,Chinese,Chinese Traditional | ||
Display | 5.7 inch,640*480 resolution,64M color LCD display | ||
Dimensions | 260mm* 220mm*75mm | ||
Weight | 2.9kg(with battery),2.6kg(without battery) |
*From: |
Enter your email |
*Message: |
Enter your Message |