Bandwidth:100MHz
Sample Rate:1GS/s
Rise Time (at input, typical):≤3.5ns
Horizontal Scale (s/div):2ns/div~1000s/div, step by 1~2~5
Vertical Resolution (A/D):8bits
Record length:40M
Waveform Refresh Rate:75,000 wfms/s
Channel:2 + 1 (external)
Display:8 inch color LCD, 800 x 600 pixels (optional 1024 x 768 pixels IPS display)
Input Impedance:1MΩ ± 2%, in parallel with 15pF ± 5pF (*, ** 50Ω ± 2%)
Channel Isolation:50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage:1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms
DC Gain Accuracy:±3%
DC Accuracy:Average≥16:±(3% reading + 0.05 div) for △V
Probe Attenuation Factor:0.001X~1000X, step by 1~2~5
LF Respond (AC, -3dB):≥5Hz (at input, AC coupling, -3dB)
Sample Rate / Relay Time Accuracy:±1ppm
Interpolation:sin(x) / x
Interval (△T) Accuracy(full bandwidth) :Single: ±(1 interval time + 1ppm x reading + 0.6ns);Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns)
Input Coupling:DC, AC, and GND
Vertical Sensitivity:1mV/div~10V/div (at input)
Trigger Type:Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232 and CAN (optional)
Bus Decoding:I2C, SPI, RS232, and CAN (optional)
Trigger Mode:Auto, Normal, and Single
Vertical Range:±2V ( 1mv/div~50mv/div), ±20V ( 100mv/div~1V/div), ±200V (2V/div~10V/div)
Line / Field Frequency (video):NTSC, PAL and SECAM standard
Cursor Measurement:△V, and △T between cursors, △V and △T between cursors, and auto- cursors
Automatic Measurement:Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count
Waveform Math:+, -, ×, ÷, FFT
Waveform Storage:100 waveforms
Lissajou's Figure: full bandwidth; Phase Difference: ±3 degrees
Communication Interface:USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)
Frequency Counter:Support
Power Supply:100V~240V AC, 50/60Hz, CAT II
Power Consumption:<15W
Fuse:2A, T class, 250V
Battery (optional):3.7V, 13200mAh
Dimension (W x H x D):340 x 177 x 90 mm
Weight:2.60 kg
Multimeter Specifications (optional)
Full Scale Reading:3¾ digits (max 4000 count)
Diode:0V~1.5V
Continuity Test:<50 (±30) beeping
Input Impedance:10MΩ
Capacitance:51.2nF~100uF: ±(3% ± 3 digits)
Voltage VDC:400mV,4V,400V:±(1±1 digit);max input:DC 1000V
VAC:4V,40V,400V:±(1±3 digits);max input:AC 750V(virtual value)
Current DC:40mA,400mA:±(1.5%±1 digit); 10A:±(3%±digits)
AC:40mA:±(1.5%±3 digits),400mA:±(2%±1 digit),10A:±(3%±3 digits)
Impedance:400Ω: ±(1%±3 digits),4KΩ~40MΩ:±(1%±1 digit)
Frequency:40Hz~400Hz
Arb Waveform Generator Specifications (optional)
Max Frequency Output:25MHz(125MS/s Sample Rate); 50MHz(250MS/s Sample Rate)
Channel: Available in 1-ch, or 2-ch
Vertical Resolution:14 bits
Amplitude Range:10mVpp~6Vpp
Waveform Length:8k
Standard Waveform:Sine, Square, Pulse, Ramp
Arbitrary Waveform:Exponential Rise, Exponential Fall,Sin(x)/x,Step Wave,Noise and others,total 46 built-in waveforms and user-defined arbitrary waveform
Module / Function (Optional)
VGA:VGA+AV Port
WIF:WiFi
AWG:Arb Waveform Generator
DMM:Digital Multimeter
TOU:Touch Screen (capacitor-type)
Decoding Kit (Optional)
RS232:RS232
SPI:SPI
I2C:I2C
CAN:CAN Trigger / Decoding
*From: |
Enter your email |
*Message: |
Enter your Message |