200MHz Bandwidth 1GSa/s Sample Rate 4 Channel Digital Oscilloscope

4 channel oscilloscope,200MHz bandwidth, minimum measurement range 500μV /div,1GS/s sample rate, advanced digital trigger system,high trigger sensitivity,low trigger jitter,high resolution 7 inch 64K color TFT LCD.

Bandwidth:200MHz

Rise Time (BNC, typical):≤1.8ns

Sample Rate Range:1GS/s

Channel:4 Channel+EXT

Input Coupling:DC,AC or GND

Input Impedance:1MΩ±2%,20pF±3 pF

Probe Attenuation:1X,10X

Supported Probe Attenuation Factors:1X,10X,100X,1000X

Overvoltage Category:300V CAT II

Maximum Input Voltage:300VRMS (10X)

Waveform Interpolation:(sin x)/x

Record Length:Maximum 64K samples per single-channel; Maximum 32K samples per dual-channel (4K, 32K optional)

Horizontal Scale (s/div):2ns/div~100s/div,1~2~5 sequence

Sample Rate and Delay Time Accuracy:±50ppm

Delta Time Measurement Accuracy

(Full Bandwidth):Single-shot, Normal mode: ±(1 sample interval+100ppm*reading+0.6ns)

                        >16 averages:±(1 sample interval+100ppm*reading + 0.4ns)

                        Sample interval = s/div ÷ 200

AD Converter:8-bit resolution,each channel sampled simultaneously

Vertical Scale(Probe 1X):500μV/div~10V/div at input BNC

Position Range:500μV/div~20mV/div, ±400mV

                       50mV/div~200mV/div, ±2V

                       500mV/div~2V/div, ±40V

                       5V/div~10V/div, ±50V

Selectable Analog Bandwidth Limit:20MHz(typical)

Low Frequency Response (-3db):≤10Hz at BNC

DC Gain Accuracy:±3% for Normal or Average acquisition mode, 10V/div to 10mV/div; 

                     ±4% for Normal or Average acquisition mode, 5mV/div to 500μV/div

Acquisition Modes:Normal, Peak Detect, Average and HR

Acquisition Rate(typical):Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement)

Trigger Mode:Auto, Normal

Trigger Level;CH1~CH4:±4 divisions from center of screen; EXT:0~3.3V

Holdoff Range:20ns~10s

Trigger Level Accuracy:CH1~CH4:0.2div*volts/div within ±4 divisions from center of screen; EXT:± (6% of setting + 40mV) 

Trigger Type:Edge,Pulse Width,Video,Slope,Overtime,Window,Pattern,Interval,Under Amp

Decode Type (Standard):I²C,SPI,UART,LIN,CAN

Cursors:Voltage difference between cursors: △V

              Time difference between cursors: △T

              Reciprocal of △T in Hertz (1/ΔT)

Automatic Measurements:Frequency, Period, Average, Pk-Pk, RMS, PeriodRms, Min, Max, RiseTime, FallTime, + Width, - Width, + Duty, - Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, PeriodAvg, FOVShoot, RPREShoot, BWidth, FRR, FFF, FRF, FFR, LRR, LRF, LFR and LFF

Display Type:7 inch 64K color TFT 800*480 pixels

Dimension:318 x 110 x 150mm(L x W x H)

Weight:2900g

DSO4000B.pdf