Add to Favorites |
Worldwide
中文 |
Polski | English
 |
10Hz~100kHz LCR Meter
Features:●Store 999 LCD screen files, trigger delay, automatic level control (ALC) ●Multi-frequency test: support 10 frequency scan tests ●Multi-level test: support 10 level scan tests ●Absolute deviation (ABS) comparison mode, relative deviation (PER) and order (SEQ) comparison ●Switchable accessory file (AUX) sorting ●Programmable from 1 to 200 times to provide stability ●Custom sorting results are heard ●Built-in RS232C interface and Handler interface ●1000V super shock protection  |
The newly upgraded AT3817A adopt true color TFT-LCD display and full Chinese operation interface (configurable into English). Displayed in large fonts, readings are more intuitive, used for laboratory quality control, feed inspection and component sorting. AT3817A with continuous frequency point of 10Hz~100kHz with a resolution of 0.001Hz. Test signal level 0.01Vrms ~ 2.00Vrms (10mV step), (add DCR measurement and internal DC bias (DC BIAS, ±2.5V) compared to AT28 series)
AT3817A can test the 4 parameters of the component at the same time. Each parameter can be arbitrarily configured. The newly improved instrument realizes full 6-bit display of the main and auxiliary four parameters. It can scan 10 kinds of frequencies or level lists, it can also be used for 3 groups users frequency be corrected to improve accuracy. Built-in comparator, through HANDLER interface combined with PLC to complete automatic sorting of components.
| Parameters | Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,G-B,R-X,Z-θrad,Z-θdeg,DCR |
| Monitor Parameters | Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ% |
| Accuracy | 0.05% ±5 digit |
| Frequency | 10Hz~200kHz (continuous frequency, resolution 0.001Hz) |
| Display Range | L: 0.00001uH~999999H C: 0.00001pF~999999uF R,Z: 0.00001Ω~99.9999MΩ D:0.00001~9.99999 Q:0.00001~99999.9 Δ%: -999999%~999999% q θ(deg):-179.999~179.999° q θ(rad):-3.14159~3.14159 DCR:0.00001Ω~99.9999MΩ |
| Source Resistance | 30Ω,50Ω and 100Ω |
| Range | Automatic, Manual, and nominal, 9 ranges |
| Display Max | Principle parameter: 999999; Sub parameter:999999 |
| Signal Level | 0.01V~2.00V (10mV Step) |
| DC Bias | -2.5V~+2.5V |
| Speed | 40 times/sec; 10 times/sec; 3 times/sec;can be 1~256 times average |
| Comparator | 14-bin sorting, 10-bin GD, 1-bin NG, 1-bin AUX, 2-bin principle parameter NG; |
| List Test | 10 group frequency and level scanning measurement |
| Adjustment | Open & Short circuit sweep frequency correction, 3 point frequency correction and load calibration. |
| Files | 10 group files to save user's setting, 1 group to save system data real-time |
| Interface | RS232C, ExHandler interface, standard configuration USB interface |
| Others | Store 999 LCD screen files, trigger delay, automatic level control (ALC),Built-in SCPI and MODBUS protocols;RS-485(Optional) |
| Power Supply | Voltage: 90V AC - 250V AC Frequency: 50Hz - 60Hz Max Power: 20VA |
| Demension | 264mm (W)x107mm(H)x350mm(D) |
| Weight | 4kg |
| Accessories | ATL501E:Kelvin Test clip ATL601:Test fixture ATL600:Short-circuit slice ATL508A:SMD patch test clip ATL108:RS232 Communication cable ATL608:SMD patch test fixture (optional) ATL508:SMD patch test clip (optional) ATS2818:Data acquisition software (optional) |
| *From: |
Enter your email |
| *Message: |
Enter your Message |
 |
