DCV | 200mV,2V,20V,200V,1000V |
ACV | True-RMS,200mV,2V,20V,200V,750V |
DCA | 200μA,2mA,20mA,200mA,2A,10A |
ACA | True-RMS,20mA,200mA,2A,10A |
Resisitance(Ω2W/Ω4W) | 200Ω,2kΩ,20kΩ,200kΩ,2MΩ,10MΩ,100MΩ |
Capacitance | 2nF,20nF,200nF,2μF,20μF,200μF,10000μF |
Frequency | 20Hz~1MHz |
Temerature | Support thermocouple,thermal resistance temperature sensor |
Nand Flash Sorage | 1GB |
Continuity | Support |
Diode Test | Support |
True-RMS | Support |
Period Test | 1μs~0.05 s |
Max.input Voltage | 1000V |
Measurement Speed | 150 rdgs/s |
Math | MIN. ,MAX. ,average, standard deviation,dBm,dB,Pass/Fail |
Graphic Display | Relative,Histogram, Trend curves,Bar graphs |
Display | 4.3 inch TFT-LCD display |
Max.reading | 5½ digits |
Standard Interface | USB_Device,USB_Host,LAN |
Optional Accessory | USB-GPIB Adapter |
Scanner Card SC1016
The Scanner Card SC1016 is a multiplexer that provides multi-point measurement capabilities to the SDM3055-SC. The scanne features 12 multi-purpose + 4 current channels and supports the following measurement functions: DCV, ACV, DCI, ACI, 2WR, 4WR, CAP, FREQ, DIODE, CONT and TEMP ( RTD and Thermocouple ). It provides a convenient and versatile solution for test applications that require multiple measurement points or signals and is an ideal tool for R&D burn-in and production testing.
Max AC Voltage | 125V rms or 175V peak, 100kHz, 0.3 A switched, 125VA(resistive load) |
Contact Life | > 100000 operations, at 1A 30VDC(at 0.5 Hz) > 100000 operations, at 0.3A 125VDC ( at 0.5 Hz ) |
Contact Resistance | 75 mΩ (maximum at 6VDC, 1A) |
Actuation Time | 180ms maximum on/off(channel to channel) |
Maximum Switching Voltage | 250 VAC, 220 VDC |
Maximum Switching Power | 62.5VA / 30W |
Insulation Resistance | Minimum 1GΩ(500VDC) |
Connector Type | Clamp terminal, #24 AWG wire size |
Channel Capabilities
Item | No. of wires | No. of channels |
DCV , ACV | 2 wires (H , L) | 12 (CH1~CH12) |
DCI , ACI | 2 wires (H , L) | 4 (CH13~CH16) (2A Range Only) |
2W Resistance | 2 wires (H , L) | 12 (CH1~CH12) |
4W Resistance | 4 wires (Input H , L + sense H, L) | 6 pairs (CH1 [input] & CH7[sense], 2&8,..., 6&12 ) |
Capacitance | 2 wires (H , L) | 12 (CH1~CH12) |
Diode/Continuity | 2 wires (H , L) | 12 (CH1~CH12) |
Period/Frequency | 2 wires (H , L) | 12 (CH1~CH12) |
Temp(Thermocouple) | 2 wires (H , L) | 12 (CH1~CH12) |
Temp (RTD) | 2 wires (H , L) | 12 (CH1~CH12) |
*From: |
Enter your email |
*Message: |
Enter your Message |